Basic Info.
Material Capabilities
Hardened Metals
Product Description
(,.) picture is for reference only. Technical improvements and appearance changes are subject to contract negotiation.:Main mechanical characteristics ,,,,,.,.45#,,,,,;50mm,,,,;,,,. product can one-time complete cardboard two-color printing, cutting, indentation, trimming, grooving, die-cutting and many other processes. Adopt chain paper feeding mechanism, main machine frequency conversion control. The transmission gear adopts 45# steel helical teeth, spray lubrication, the main transmission gear and the transmission shaft adopt the method of increasing and tightening the key-free connection, so that the virtual position is enlarged, the wear of the center is cancelled, and the printing press keeps the overprint precision of long life. The thickness of the wall panel is 50mm, the whole machine adopts electric separation, pneumatic locking, close combination of single machine, printing does not move; the machine has the characteristics of accurate colouring, exquisite printing pattern, convenient use and maintenance, high degree of automation | |
1Platform clutch | - ,,.
alarm bell is attached to the electric control platform, and the alarm is constantly ringing during the journey to ensure the safety of the operator- .Pneumatic interlocking device
|
2Paper roller | - Ø73mm,,Ø103mm. outer diameter of the up-feed roller is 73 mm, thick-walled steel pipe, with four external diameter and four 103mm paper-feeding rings
2)Ø135mm,.outer diameter of the lower feed roll is Ø135 mm, embossed hard chromium plating 3),1.2~12mm.Manual adjustment of feed roller clearance dial, adjustment range 1.2~12mm |
()Printing Department | |
1Printing roller () | - Ø410mm().Outside diameter is Ø410mm (including plate outer diameter size)
- ,Steel pipe surface grinding, hard chromium plating
- ,.Balance correction, smooth operation
- .Equipped with electric control for forward and reverse rotation
|
2Printing pressure roller | - Ø135mm .Outer diameter is Ø135mm
- ,.Steel pipe surface grinding, hard chromium plating
- ,.Balance correction, smooth operation
- 1.2~12mm.Manual adjustment range of printing roller clearance dial 1.2~12mm
|
3Paper feed upper and lower rollers | - :Ø73mm,Ø103mm.Top Roller: the outer diameter of the pipe is a thick Ø73mm steel pipe, with four external diameters and the output of the Ø103mm paper ring.
- :Ø135mm,,.Lower Roller: thick-walled Steel Pipe with external diameter of Ø135mm, Surface Grinding, hard Chromium plating
- ,1.2~12mm.Manual adjustment of feed roller clearance dial, adjustment range 1.2~12mm
|
4Steel anilox roller | - Ø175mm.22mm.The outer diameter is Ø175 mm. Wall thickness 22mm
- 180280.()Mesh number 180 to 280. (depending on the number of items selected)
- ,,.Steel pipe surface grinding, pressing mesh, hard chrome plating
- ,.Balance correction, smooth operation
- (,).Air-pressure automatic lifting device with paper feeding system (web roller drop in contact with printing plate when feeding, stop web roller rising and plate separation when feeding)
6),,.Reticulated roller with wedge type overrunning clutch, uniform ink, convenient and quick for ink washing |
6 Rubber roller | - Ø157mm.Outer diameter is Ø157mm
- ,.Steel pipe surface coated with wear-resistant rubber and balance corrected
- ,.High special grinding in rubber, good ink transfer effect
|
7Phase adjusting mechanism | - 360.360-degree adjustment of printing phase with planetary gear
- .Electric digital display phase
|
8Ink cycle | - ,,.Pneumatic diaphragm pump with stable ink supply and simple operation and maintenance
- ,,.Ink filter, filter impurity, ink separation
|
9 Printing phase fixing device | - Cylinder type automatic brake device
- ,,.When the machine is separated or adjusted, the brake mechanism limits the rotation of the machine and maintains the fixed point of the original gear position.
|
()Die cutting | |
1()Die roller (lower roller) | - 360m()External diameter is 360m (without wooden die)
- 45#,.Surface grinding of 45# cast steel, hard chromium plating
- ,.Balance correction to increase operation stability
- 100mm×62.8mm
Rotary die fixed screw hole spacing 100mm × 62.8mm- 25.4mm Suitable for tool die height 25.4mm
- :16mm() 13mm()Thickness of wood template: 16mm (for three-layer board) 13mm (for five-layer board)
|
2()Rubber cushion roller (upper roller) | - 394.5mmOuter diameter is 394.5mm
- 45#,.Surface grinding of 45# cast steel, hard chromium plating
- ,.Balance correction to increase operation stability
- .Manual adjustment and tool roller clearance
- 9mm,250mm.Rubber Pad thickness 9 mm, width 250mm
- ,,,.Rubber adhesive uses Taiwan super-resistant high-quality products, for detachable type, can quickly change the brand-new Youli adhesive, restore die-cutting accuracy
- ,,,.The automatic grinding device of detachable Youli adhesive has the function of automatic compensation for the linear speed of the wheel, which can automatically compensate the linear velocity after grinding, so as to maintain the accuracy of each batch of cartons.
- 40mm.Mechanical transverse 40mm swimming device
|
2Phase adjusting mechanism | - ,.Planetary gear construction, using cylinder buffer rubber wheel feed paper
- ,360°.(,).Die-cutting phase adopts planetary differential structure and digital display controls 360 °adjustment. (running, stopping can be adjusted
|
| Component Name | picture | introduction | brand | remarks |
1 | | | 5.5kw | delta | 1 |
2 | | | | | |
3 | | | | | |
4 | | | | | |
5 | | | 5.5kw | | |
6 | | | 0.18kw 0.37kw | | |
7 | | | 550w | | 2 |
8 | | | 550W | | 2 |
10 | | | 50mm | | |
11 | | | 40mm | 45# | |
12 | | | ∮400mm | | 45#,,,18mm |
13 | | | ∮175mm | | 22mm, |
14 | | | ∮157mm | | 22mm, |
15 | | | ∮135mm | 25# | :20mm,, |
16 | | | ∮394.5∮360 | | 40 mm, |
17 | | | | | |
18 | | | | | |
19 | | | | | |
20 | | | | | |
21 | | | | | |
22 | | | 250mm | | |
: | | 400×2400 |
Maximum printing area | mm | 1200×2100 |
(×) Minimum machining dimensions (length x width) | mm | 400×400 |
Printing plate thickness | mm | 6 |
Applicable board thickness | mm | 2~10 |
Maximum mechanical speed | sheets/min | 60 |
economic speed | sheets/min | 30-50 |
Main motor power | KW | 5.5 |
Color precision | mm | ±0.75 |
Die cutting precision | mm | ±1 |
machine weight | kg | 7000 |
Address:
Dongguang County Hebei Province, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Our company is specialized in different kinds of products. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we make our products with good quality at the reasonable price.